Wholesale aboveground Swimming Pool 304stainless Steel Ladder
swimming pool ladders are constructed of the OD=42mm, 304 or 316 grade of stainless steel handrail with a polished and buffed finish. Ladders come complete with stainless steel steps with non-skid inserts or plastice step , rubber bumpers,and anchoring fixtures to keep the ladder closer to the pool wall.
1. Stainless steel 316 material Swimming pool Ladder specifications
1) Material: Stainless steel 304 or stainless steel 316
2) Pedal material: SS304 or Plastic material
3) Width of pedal: 7.5cm
4) Tube diameter: 42mm
5) Thickness: 1.0/1.2mm± 0.1mm
6) Width: 60cm
Handrail ladder Installation instruction:
1). Clean out the ladder cups in your pool deck with a high-pressure spray of water. Over the winter, dirt, leaves and grime accumulate inside these holes. Failure to clean out the ladder cups will prevent installation of the ladder. Watch out for flying debris that can be quite smelly from decomposition.
2). Insert the ladder bumpers onto the bottom edges of the ladder railing. Ladder bumpers look like a rubberized cork and help protect pool liners or concrete siding from damage as the ladder moves.
3). Place the ladder wedge inside each ladder cup on the pool deck. Insert the socket and loosen the wedge with a counter-clockwise turn so it lies flush against the outside edge of the cup. When tightened, the wedge holds the ladder firmly in place to prevent slippage.
4). Slide the ladder carefully into the water, making sure the bumpers don't fall off into the pool. Installation works best if you stand between the ladder rails and slowly slide the ladder bumpers against the side of the pool. Slide the ladder covers up the exterior rails to keep them out of the way.
5). Insert the exterior ladder posts into the ladder cups in your pool decking. Wiggle the ladder until the rails slide completely into the cups with very little play. Rails should be positioned inside the wedges to allow for tightening of the bolts.
6). Attach the socket to the wrench and tighten down the bolts inside the ladder wedges in a clockwise motion. It comes in handy to have a helper to hold the plastic ladder covers out of the way when tightening the bolts. Tighten both sides completely and position the ladder cup covers to hide the point where the ladder meets the deck.
7). Test the ladder to assure complete and proper installation.
2. Factory introdcution------Guangzhou Fenlin Sauna equipment Co., Ltd
Factory expereices: 9 years
Business line: Swimming pool, fountain and spa series product
Company Overview:
Guangzhou Fenlin Sauna Equipment Co., Ltd, established in 2004, professional in producing and selling sauna equipments, swimming pool equipments, SPA equipments and fountain equipments.etc.
Striving in creating, quality and service for these years, we have possessed our own brand, in the meantime, have developed our foreign market of around one hundred countries as well as developed a sales network covers most of the eastern big cities at home.
We provide clients with services as product sourcing, design and engineering, OEM manufacturing, quality control, shipment inspection.
Company Profile
