Carbon Fiber with Graphite Braid Glanded Packing Set

PTFE packing is a good sealing material, and it is made by braiding PTFE strips.
With High cross-sectional density and structural strength ;
Low coefficient of friction result in easy shaft running ;
Long lubricant squeezed out under operating pressure.

Application:
PTFE packing is for dynamic seal at high linear speed, often used in check and needle valve stems, reciprocating rods, rams, and plungers, and safety injection system valves.

Specifications:
1) Pressure: 2MPa in centrifugal pumps, 10MPa in piston pumps, 20MPa in valves
2) Temperature: <280°C
3) Linear speed: 4m/s in centrifugal pumps, 2m/s in piston pumps, 2m/s in valves
4) pH range: 0 - 14
5) Thickness: 3.0 - 50mm 
 
Pure Graphite Ptfe Packing are found in electric engines, transmissions, agricultural machines, bearing pedestals and rolling mills. 
Pure Graphite Ptfe Packing used to seal against dust, dirt, lubricant, oil or water spray from the outside.

Images




We can provide Black Pure Graphite Ptfe Packing, White Pure Graphite Ptfe Packing, Yellow Pure Graphite Ptfe Packing... We can make according to your requiments, but materials have an effect on color. So, not all the material can make in all color.
 Application Parameter of Pure PTFE Packing :
PTFE packing is a good sealing material, and it is made by braiding PTFE strips.
PTFE packing With High cross-sectional density and structural strength ;
PTFE packing is Low coefficient of friction result in easy shaft running ;
PTFE packing is Long lubricant squeezed out under operating pressure